Showing posts with label Penny Farthing saddle. Show all posts
Showing posts with label Penny Farthing saddle. Show all posts

Sunday, 3 March 2013

Plating EQC Frames


I have a very good excuse you know.

I mean for not posting an entry for such a long time. The house has been repaired from the earthquake damage and we have been forced to take refuge in a B&B for the last month. B&Bs are OK for a few days at most, after a few weeks they become tiresome and after a month, positively ghastly. We turned the house over to the builders and my lovely wife (resident soft furnishings expert) chose new paint and wallpaper. We got lucky, our builder was excellent, indeed he is worth a mention. David Peach of North Canterbury Renovations did an excellent job, it's just unfortunate that the rest of the house looks a little shabby now. But I digress.

The B&B was at just the wrong distance from the house, it meant evening visits to The Shed were awkward at best and consequently I have made little progress. As promised, I have made a new seat post mount (at the correct angle this time) from a slightly thicker strap of steel. I wasn't happy with the old one but this one is good, much stronger. Also I've plated all of the saddle components which means the saddle is now ready for a leather top.

 If I've counted correctly, there are 48 individual pieces that have all had 
to be hand made in the saddle frame, no wonder it's taken me this long.

I plated the parts over three consecutive nights. I did the rails last and 
needed to borrow a Lego storage box from my son to get the length I needed.

Ready for a good leathering.

I was asked last time if I am going to make one or get one from Longhorn Leather here in Christchurch. This is a good question not easily answered. I can dismiss the Longhorn option immediately, not through bad workmanship, they are very good, but because I find their saddle tops too two dimensional for my arse. I've ridden a few 90km days on one of their tops and it just didn't fit my backside very well. A long time ago a friend of mine offered to make my leather top, so he could contribute to the project. Tim's work is first rate and at the time I happily agreed. Now though, after 20 months of this business, I'm of a mind to make it myself. I've done a lot of leather work in the past and even a few saddles. It also means I won't lose my precious frame in the post, a problem that unfortunately I have recent experience of. Tim is acting as my mentor for this stage, more later.

In other news, I had a disaster whilst we were out of the house. I have a pair of lovely wood rimmed wheels (28 x 1 3/8") or 700A, ETRTO 37-642. These have sat in my lounge for ages waiting for a suitably ancient frame to turn up. When we had to clear out I noticed that the rear tyre was soft so put 30psi in to maintain the shape and moved it into the garage. The next time I saw it, it looked like this:

Oops (and other, stronger words).

I will mend it but probably won't be able to ride it again. The sad thing is, I now have a frame that would suit these very well.

Also this week, two other projects are nearing completion. The fruit of Young Dylan's labour was brought round to my shed this week to get all the threads and bearing surfaces cut or cleaned up. I have one of these you see.
You are welcome to have use of it but it doesn't leave my shed.

I'm more than happy to prep frames for other people at no charge if they bribe me with sweeties, biscuits or beer. He's done a great job and I look forward to his report of the first commute on it. Not bad for a tyro ;-)

Tweed Pete has also brought his newly complete MkII round to my shed for the same purpose, this features 4130 chromoly tubing which Pete has TIGed together himself. Pete has also thrown some old parts on it so he can ride it tirelessly up and down his road with a big grin on his face. I can imagine his neighbours children commenting "Mum, that special man's riding his bike again". I'm not yet allowed to post a picture. It will be making it's debut once fully complete.

Sadly, both Pete and Dylan are unnecessarily tall and consequently I'll be unable to ride either one properly.

Thursday, 7 February 2013

The Tension Mounts


As promised, I've been busy making the tensioning hardware for the saddle this week. I am fortunate in that I have a Brooks saddle from this period in my possession so I have been able to make exact fac similes of the components relatively easily. This is convenient because I had a brain fart and neglected to take any measurements of these bits on the original.

 Too much tension, or more likely just shrinkage from 125 years of neglect 
has caused the original leather to part company at the nose piece.

Lots of photos but no measurements. 

Unfortunately, this week I did the exact opposite, I took loads of measurements but no photos. So you'll just have to look at the finished bits and imagine the steps involved. Sorry about that.

 Some fiddly filing fun.

 I have some nice copper rivets ready for these holes.

Now that the saddle frame is finished, I'll probably
 make  a new seat post at the correct angle this time.
The camera has made it appear worse than it is.

I still need to polish and plate all the saddle stuff which will take a little time, then I need to have a little think about what to do next.


In other news, it is with some degree of sadness that I must report the death of the pub argument. I am a member of a pub quiz team, quite a successful team as it happens. But that is incidental, the pub quiz is merely an excuse to go down the pub and talk nonsense and escape from reality for a short period of time. Our particular pub quiz only actually runs during the winter months, however we still attend the pub on 'pub quiz nights' throughout the year. We have a loose collective of professional members and whoever turns up turns up. It is suspected that certain members have not told their respective wives of the winter only thing. As a team we can generally clean up on the 'real' questions on science, geography, literature, proper sports, decent music from our youth etc. However, we are utterly hopeless on the 'fluffy' questions. Who won American 'X' Factor Idol Got Talent last year? Not a clue. I hesitate to suggest that it may be because we enforce a strict 'no girls allowed' rule.

In these off season evenings certain topics come up from time to time that cause discussion, sometimes heated but always cordial and enjoyable. Classic pub arguments. These would often last until the next week when somebody would have looked it up to prove the point and get a free pint. This is now a thing of the past, what happens now is that somebody whips out one of these modern "electric smart phone" devices and the prosecution rests m'lud. Not as much fun...

Thursday, 24 January 2013

Front Saddle Mounts


As mentioned last time, I've spent my shedweek making the front mounts.

 I've never seen front mounts like these before. 
They match the catalogue illustrations, so clearly the original saddle and worth copying.


These are tricky little blighters with lots of angles and sticky out bits and holes and stuff. After a little planning (read trigonometry) I calculated that I could just get them out of a piece of 1 1/8" bar stock if I was careful and had a bit of a tailwind. The mounts have angled holes and faces in multiple planes which means that I need to machine the containing shape out accurately before drilling and tapping the relevant holes. Only when this is done can I then smooth out the angles and make them appear more organic. The originals would have been castings with very little clean up.

My new milling machine got an extensive trial this week, I'm still learning the best way to use it with the tooling I have available to me. Also I spent quite a considerable period of time making the thing run a bit more quietly. This is a known issue with the Mk1 Dore Westbury mills. They have an epicyclic gearbox that uses straight cut Myford change gears that are noisy in use.

Initially I machined the angled flats by using a Myford swivelling vertical slide, but after a period of time I realised that I could get the same results with more rigidity if I just used a machine vice and set up the work with a combination square with a protractor head.

A series of photos will illustrate the process as usual.

 Mill flats on either side of the bar stock.

 Mill the angled faces using the swivelling slide.

 And again.

 Before I ditched the swivelling slide due to clearance issues 
and just used a combination square to set the angles.

 Mill another flat on the side.

 Mark out and cut the two halves. 

And now mill faces in the other plane.

Hacksaw off some excess...

... before milling to size.

 All the faces are now done, so I can drill and tap the
 holes at the correct locations and angles.

 Starting to clean up with a file.

Beginning to take shape.

A little more  thinning is still needed before I'm happy.


Next week I'll start on the saddle tensioning components.

In other news, the whanau have left me and gone to visit relies in Australia for the week, Whilst they have gone we have had 30+ degree days and bush fires. Honestly what has 'stralia got that you can't get right here in Canterbury. A few weeks ago I even saw a wallaby at the side of the road as I was cycling home. It was just at the Tram Road and Northern Motorway intersection. I know that they occur down in South Canterbury but I never seen one this far North before. I know for certain that it was a wallaby because I was able to watch it for a long time without it running off. In fact I would have been greatly surprised if it had run off since it was dead. I looked it up and apparently it is a Red Necked or Bennett's Wallaby. It is of course possible that it was killed down South and inadvertently or otherwise carried North. It wasn't there the next day so it was probably just resting or something.

Monday, 17 December 2012

Saddle Mounts Part 2


Last shedweek I made the saddle mount, the near vertical post that clamps to the backbone. This shedweek, I've made the little doodad that clamps to it and carries the saddle springs. I'm not sure what the correct name is for this part but I'll call it the spring carrier for want of a better term. It's a lovely little thing, very pleasing to look at.

Spring Carrier Doodad.

Calculations on the original facile example and a few others I have handy showed me that I could machine the shape from a 1" bar.

The first step is to mill an identical flat on either side of the bar so that the final thickness is 0.75". This was the first proper use of my new milling machine, the finish is OK but not that great at present, I'll try a new belt to see if I can even out the finish. The finish is not important in this case since so much of it is going to be removed through subsequent operations.


The next step is to drill three holes in one of the flat faces, the two end holes are tapped at 1/4" cycle thread as a temporary means of mounting to a face plate, these end holes are where the springs will be mounted. The middle hole is used to centre the bar on the face plate.


Then bore the central hole to be a nice fit onto the saddle post.


Next machine the side on profile using a profile tool. This type of interrupted cut is very hard on tools, even using small feeds. The finish is unimportant since it will be hand filed later.


Next remount at 90 degrees using an old section of angle iron. Mark and bore the cross hole for the 3/8" bolt to clamp the carrier to the saddle post.


Then machine the profile of the side.


Flip around and machine the back of the carrier in the same way.


Finish with hand files and make the 2 bolts to hold the springs and the larger one to secure the carrier to the post.





In other news, I'm being tossed on the horns of a dilemma. In our house, we try hard not to go mad on Christmas presents. Sure, the kids get a little spoilt and they get things that I would have loved as a child but I'm talking about presents to each other, to my lovely wife. Officially we have a complete spousal gift moratorium. We both agree in advance not to be silly and to treat the festive season as a time to spend together as a family with the necessary reduction in shed based activities. Unfortunately, I happen to know for a fact that my lovely wife has bought me something this year. My daughter told me. What do I do? If I buy her something, I'll have let on that I know that she bought me something and if I don't buy her something I may as well go and live in the shed until next year. I can't win. I think the solution is to buy her a present and wrap it in a generic Christmas/birthday style wrapping paper, then hide it down the back of the sofa rather than under the tree. If I'm right and she has got me a present I can whip it out and still be in favour and if I'm wrong and she hasn't broken the gift embargo, then I can just keep it until her birthday in August. Sorted.

Whatever, happy Christmas to both of my readers.